台湾标准电机SEW仪器仪表--2126 NA Loop Testers
    <tfoot id='rugf7'></tfoot>

    • <tbody id='rugf7'></tbody>


          
       
      2126 NA   Loop Testers
      2126 NA
      FEATURES
       
       Built-in earth tester.
       Built-in loop / psc tester. 0.03 - 2000 Ohm (software ctrl).
       Built-in voltmeter.
       Built-in wiring checker.
       One push button smart control.
       Dispaly L-N and L-E voltages. 50 to 280 Vac (sine).
       Dispaly line path impedance. 0.01 - 2000 Ohm (software ctrl).
       Dispaly earth path impedance. 0.01 - 2000 Ohm (software ctrl).
       Dispaly neutral path impedance. 0.01 - 2000 Ohm (software ctrl).
       Display psc line to neutral. 6kA@230Vac supply.
       Re-scroll trough previous results.
       Bat. ok / low battery indicator.
       Auto-off function.
       Color-coded test leads.
       Rugged Case.
       Ultra low power consumption.
        CAT III 270V
       The 2162 NA is the first portable real electrical network analyzer. It has a built-in earth tester which does not require the use of poles or long wires. This instrument is useful for fault-finding or commisioning of electrical installations. Differentiating between the line (hot), neutral and earth (ground) path by reading their values has never been easier.
       Bad contacts, old wiring or bad earth path are quickly identified. Faulty electrical network can be resolved in a fraction of the time normally required using conventional equipment. Down time due to a faulty electrical network is minimal as the fault can be identified and diagnosed quickly.
       Find which wire need to be attended to and why (find those old wires with high impedance before a fire starts and replace them). The complete electrical network can be analyzed by scrolling through the results. It has built-in loop impedance and prospective short circuit tester as well as a voltmeter.
      SPECIFICATIONS
       
      Loop/Earth/Wires 0.03 - 2000 Ohm (auto-ranging)
      Prospective Short Circuit 0 ~ 6kA at 230Vac
      Operating Voltage 50V ~ 275Vac (50Hz)
      Best Performance at Raged Voltage 230Vac +/- 20% Max. 10A
      Accuracy of Voltage +/- 1% (210 ~ 250V), +/- 3% otherwise
      Accuracy of Loops/Earth +/- 2% (0.05 ~ 50 Ohm)
      Accuracy of Wires Impedances +/- 15% (above 500 Ohm)
      Operating-Temperature-Humidity 0 degree C ~ 40 degree C 85% maximum
      Dimensions 210(L) x 210(W) x 100(D)mm
      Weight Appox. 1445g (battery is included)
      Power Source 1.5V SUM-3 (AA) x 8 or equivalent
      Accessories Test leads (AL-34)
      Shoulder belt (BET-1800)
      Instruction manual
      Batteries
      特 點
      ● 微處理器系統控制設計。
      ● 只需操作一個按鍵,即可進行全部功能檢測。
      ● 內建接地量測。
      ● 內建迴路阻抗/預期短路電流量測。
      ● 內建電壓量測。
      ● 內建接線檢測。
      ● 可顯示L-N和L-E的電壓值。
      ● 可顯示不同迴路的阻抗值。
      ● 電源能量指示。
      ● 自動關機設計。
      ● 耗費電源微小。
      ● 符合 CAT Ⅲ 270V
      EN 61326-1
      規 格 (23°C±5°C <80%R.H.)
      迴路/接地/接線
      阻抗量測範圍
      0.03-2000Ω
      (自動換檔)
      預期短路電流 0~6kA at 230 交流電壓
      操作電壓 50-275V交流電壓(50Hz)
      量測 條件 230Vac±20V Z大電流10A
      電壓準確度 ±1%(210-250V)其他:±3%
      迴路/接地阻抗準確度 ±2%(0.05-50Ω)
      接線阻抗準確度 ±15%
      操作環境 0°C to 40°C
      80% Maximum
      外形尺寸 210(長)×210(寬)×100(高)mm
      重量 約1445g(含電池)
      使用電池 1.5V(AA)×6(顆)
      <legend id='rugf7'><style id='rugf7'><dir id='rugf7'><q id='rugf7'></q></dir></style></legend>
      <i id='rugf7'><tr id='rugf7'><dt id='rugf7'><q id='rugf7'><span id='rugf7'><b id='rugf7'><form id='rugf7'><ins id='rugf7'></ins><ul id='rugf7'></ul><sub id='rugf7'></sub></form><legend id='rugf7'></legend><bdo id='rugf7'><pre id='rugf7'><center id='rugf7'></center></pre></bdo></b><th id='rugf7'></th></span></q></dt></tr></i><div id='rugf7'><tfoot id='rugf7'></tfoot><dl id='rugf7'><fieldset id='rugf7'></fieldset></dl></div>

          <bdo id='rugf7'></bdo><ul id='rugf7'></ul>